Text Resize

  • -A
  • +A
  • Your rating: None (7 votes)

    Garden Tote is Easy and Useful

    more on woodworking safety

    Tools and Materials

    I designed this simple project to introduce my daughter to woodworking, but it is a great one for beginners young and old. You can make this handy garden tote from a single cedar deck board, a dowel, and a few screws from your local home center, and the only tools you need are a drill and any kind of power or hand saw. Fill it with new gloves and tools, and you'll make a gardener very happy. The nice thing about decking boards is that the corners are already rounded. Ask for 1x6 deck boards, which should actually measure 5-1/2 in. wide and about 3/4 in. thick. Since this blog was originally published on FineWoodworking.com, we updated the design a bit, and you'll find a plan here for the new-and-improved tote. The main difference is that there are the few simple curves we added. Also, the holes for the handle go only partway through, hiding its ends, though you could drill all the way through and it would still look great. We did some of the work on machines like a bandsaw and drill press, but a hand-held drill and a jigsaw would work just as well. A handsaw can also handle the straight cuts with a coping saw making the curved ones. The sides and bottom are attached with rust-resistant decking screws. Make it easier on yourself by drilling clearance holes in the top board and pilot holes in the board below. Click the box at the top of this page to download the plan. —Asa Christiana

    How to Make

    Lay out the cutsclick to enlargeLaying out cuts

    Lay out the cuts: The original had straight lines and we laid them out with a ruler. For the new design, print out the plan, cut along the curves with a scissors, and then lay the paper right on the wood to mark the cuts.

    Lay out the cutsclick to enlargeCutting parts on the bandsaw

    Cut out the parts: A jigsaw or handsaw would work fine, but a bandsaw sure is fun, and it is safe enough that my daughter can use it, as long as I stay just over her shoulder. It is her favorite tool in my shop, and she is very careful to keep her hands away from the blade.

    Lay out the cutsclick to enlargeDrilling clearance holes

    Drill pilot holes: She wobbled a bit, but Lucy drilled the clearance holes...

    Lay out the cutsclick to enlargeDriving screws

    Assemble the tote with screws: Drive all the screws. A 12V or smaller drill would have been better than my Milwaukee 14.4, though.